| Analog Inputs : 5 | XLR1 ; XLR2 ; RCA3 ; RCA4 |
| MM / MC RIAA Phono | |
| Analog Outputs (Rear) : 2 | 1 Stereo Pair of RCA |
| 1 Stereo Pair of XLR | |
| Headphone (front) : 1 | 1/4″ (6.3mm) stereo for 32 – 1.200 Ohms Headphone |
| Line Preamp | |
| Tubes | 1 x 12AU7 2 x EL84 (6BQ5) |
| Coupling | Single Ended Transformer |
| Gain | Max +22dB |
| Frequency response | 10Hz – 32kHz (+/-1dB) |
| HUM Noise | < 0.1 mV |
| VU Meter | VU Light ON / OFF |
| VU Scale Low / High | |
| Balance (Left / Right) | (RIGHT) -2dB , – 1 , 0 , -1 , -2dB (LEFT) |
| Sound Mode | Standard / Dynamic |
| Gain | 0 / +10dB |
| MM/MC Phono RIAA | MM : +40dB / 47k |
| MC : +60dB | |
| MM 47kOhm | |
| MC Load impedance : 22 , 47, 100, 220 ohm | |
| SUBSONIC Filter ON / OFF | |
| Power Requirements | 230V / 115V (50-60Hz) |
| Power Consumption | 30W |
| Dimensions (W x D x H) | 45 x 37 x 14 (cm) |
| Weight | 15kgs |
| Remote control | Included |
| Tube Class A Zero feedback |
MP-1 VACUUM TUBE PREAMPLIFIER
SPECIFICATIONS
INTRODUCTION
Frequency Response Analysis of MP-1 Vacuum Tube Preamplifier
AUDIO SYSTEM SUGGESTION
 |
 |
 |
 |
 |
|
|
 |
IMAGES
